제품정보 | Model
(옥조 외날형 전정가위)
(Razorsaw Single Blade Pruning Shears)
규격(Specification)
| Art.No. | 모델명 | 색 | 손잡이 재료 | 날 길이 | 날 두께 | ||
|---|---|---|---|---|---|---|---|
| TS178 | RAKUNANDESU PRUNING SHEARS | Walnut Brown | Aluminium die-casting Elastomer resin Polyamide Iron | 40mm | 1.4mm | ||
| TS179 | Uguisu Green | ||||||
| TS180 | Indigo Blue | ||||||
| TS181 | Replacement Blade | - | Polyamide | ||||
설명(Details)
- 미키 카지야무라 라쿠난데스 앤빌 프루너의 특성
4가지 색상으로 제공됩니다. 왼쪽부터: 월넛 브라운, 카키, 인디고 블루, 로즈 레드.
1. 교체 가능한 날을 가진 앤빌형 가지치기 가위.
2. 절삭면에 힘이 집중된다.
3. 개방 각도를 위한 2단계 조정
4. 스프링 강도를 위한 3단계 조정
5. 안전 잠금 장치를 잡고 엽니다.
6. 가벼운 무게.
7. 칼날 끝의 충격 경화
8. 스트랩을 끼우기 위한 작은 구멍.
9. 네 가지 색상으로 제공됩니다.
1. 조절 가능한 앤빌 프루너.
앤빌 가지치기 가위는 일반적인 가지치기 가위에 비해 손목에 큰 부담을 주지 않습니다다. 건염이 생기는 것을 막아줍니다.
일반적인 가지치기와 달리, 두 개의 칼날은 재료를 자를 때 서로 미끄러지지 않습니다.
칼날을 교체하려면 나사를 하나만 빼면 됩니다. 앤빌을 밀어내는 방식으로 교체할 수도 있습니다. 블레이드의 위치를 조정할 필요가 없습니다.
칼날과 모루는 부엌칼과 도마처럼 작동합니다. 오른손 사용자와 왼손 사용자 모두에게 적합합니다.
2. 절삭면에 힘이 집중됩니다.
JP. 특허 제5547700호
재료에 힘이 효율적으로 가해져 절단이 용이합니다.
칼날과 모루가 열려 있을 때, 두꺼운 재료가 입구의 맨 뒤에 들어갈 수 있도록 설계되었습니다. 당신은 큰 가지들을 쉽게 가지치기 할 수 있다.
그것들은 당신에게 깨끗한 칼자국을 주고, 그것들은 절단면을 손상시키지 않습니다. 그래서 그것들은 꽃꽂이에 아주 좋습니다. 접붙이기에도 사용할 수 있습니다.
3. 개방 각도를 위한 2단계 조정
그립 크기에 따라 개방 각도를 조정할 수 있습니다.
손이 작은 여성이나 어린이, 힘을 많이 주지 못하는 사람도 쉽게 사용할 수 있습니다. 보다 효율적으로 작업하기 위해 개방 각도를 두 가지 유형으로 조정할 수 있습니다.
4. 스프링 강도를 위한 3단계 조정
장력 스프링은 라쿠난데스의 가지치기 가위에 사용됩니다. 그립 내부에 스프링이 배치돼 있어 작업 중 만지거나 잃어버릴 염려가 없습니다.
스프링의 강도는 사용자에 따라 세 가지 유형으로 조정할 수 있습니다. 여성과 어린이들에게는 약한 스프링을 추천합니다. 빨리 가지치기를 하고 싶은 사람들에게는 더 길게 뻗은 더 강한 스프링을 추천합니다. 이렇게 하면 프루너가 더 빨리 열립니다.
5. 안전 잠금 장치를 잡고 엽니다.
프루너를 잡으면 잠금 장치가 열립니다. 한 손으로 자물쇠를 되돌릴 수 있습니다. 그것을 잡고, 당신의 다리나 몸에 걸치는 후크를 누르면, 자물쇠가 다시 켜집니다.
엔드 훅 잠금의 3개 잠금 위치.
첫 번째 위치는 한 손으로 자물쇠를 채우고 싶을 때입니다. 두 번째 위치는 후크를 끝까지 잠그지 않도록 합니다. 세 번째는 프루너 케이스에 넣기 위한 손잡이 안쪽의 후크입니다.
6. 가벼운 손잡이.
물건의 무게 자체가 손에 가해지는 스트레스의 원인이 될 수 있습니다. 그립에 알루미늄 다이캐스트 합금을 사용하여 가볍지만 힘든 작업에도 견딜 수 있습니다.
그립에는 엘라스토머 수지를 사용합니다. 이것은 적당한 탄력성을 허용합니다.
7. 블레이드 가장자리 끝의 임펄스 경화
특수 충격 경화라고 불리는 기술로 칼날을 처리합니다.
임펄스 경화는 블레이드 가장자리의 끝에서만 수행됩니다. 이렇게 하면 블레이드가 갈라지는 것을 방지할 수 있습니다.
8. 스트랩을 끼우기 위한 작은 구멍.
높은 곳에서 작업할 수 있는 스트랩 구멍이 있습니다. 손목에 끈을 매면 가위가 빠지는 것을 피할 수 있다. 이 구멍을 이용해서 원하는 대로 사용하세요.
9. 조정 프리 블레이드
1. 닫힘 위치에서 드라이버 또는 코인을 사용하여 블레이드의 나사를 풉니다.
2. 앤빌을 열린 위치에서 앤빌의 끝을 향해 밖으로 밀어냅니다. 3. 모루와 몸체 사이에 4mm보다 가는 끝이 있는 슬롯드라이버 등을 끼우고 화살표 방향으로 밀어냅니다. (삼각형의 점에서 앤빌을 꺼낼 수도 있습니다. )
4. 새 모루를 끝까지 밀어줍니다.
5. 새 칼날을 금속 척추에 꽂습니다.
6. 손잡이를 잡고 an을 닫습니다.
- Characteristics of Miki Kajiyamura RAKUNANDESU Anvil Pruner
Available in four colors. From left: Walnut Brown, Khaki, Indigo Blue, and Rose Red.
1. Anvil type pruning shears with a replaceable blade.
2. Force is concentrated on the cutting surface.
3. Two steps adjustment for opening angles.
4. Three steps adjustment for spring strength.
5. Grip and open safety lock.
6. Light weight.
7. Impulse hardening on the tip of the blade.
8. Small hole for putting a strap.
9. Available in four different colors.
1. Adjastable anvil pruner.
Compared to general pruning shears, anvil pruning shears don't put much stress on the wrist. It prevents developing tendonitis.
Unlike general pruners, two blades do not slide pass each other as they cut the material.
To replace a blade, you just need to take off one screw. The anvil can be also replaced by sliding it out. No need to adjust the position of the blade.
The blade and the anvil work just like a kitchen knife and a cutting board. For both right hand users and left hand users.
2. Force is concentrated on the cutting surface.
JP. Patent No. 5547700.
Force is efficiently applied on the material, making it easier to cut.
They are designed in a way that when the blade and the anvil are open, thick materials can fit in at the very back of the opening. You can easily prune big branches.
They give you clean cuts, and they do not damage the cutting surface. So they are great for flower arrangement. You can also use them for grafting.
3. Two steps adjustment for opening angles.
Opening angle can be adjusted depending on the size of your grip.
Women and children with smaller hands or those who can not apply much force can easily use them. If you are pruning just once in a couple of years, size of the branches varies. For working more efficiently, opening angle can be adjusted to two different types.
4. Three steps adjustment for spring strength.
Tension spring is used on Rakunandesu pruning shears. Spring is placed inside the grip, so you do not have to worry about touching it or losing it while you work with it.
Strength of the spring can be adjusted to three different types depending on the user. Weaker spring is recommended for women and children. Stronger spring that's more stretched is recommended for those who want to prune fast. The pruner opens faster this way.
5. Grip and open safety lock.
When you grip the pruner, the lock opens. You can put the lock back with just one hand. Just grip it, and press a hook against your leg or body, and the lock is back on.
Three lock positions of end hook lock.
The first position is if you want to put the lock on with one hand. The second position is with the hook all the way out for not locking. The third one is the hook completely inside the handle for putting it in the pruner case.
6. Light handle.
The weight of the item itself can be the cause of stress on your hand. Alminum die cast alloy is used on the grip, so it's light but can withstand hardwork.
We use elastomer resin on the grip. This allows moderate elasticity.
7. Impulse hardening on the tip of the blade edge.
We treat the blade with a technique called special impulse hardening just like we do on our hand saws.
Impulse hardening is done only on the tip of the blade edge. This prevents blade from cracking.
8. Small hole for putting a strap.
There is a strap hole for working at high place. You can avoid losing the shears by wearing a strap on your wrist. Please take advantage of this hole and use it as you like.
9. Adjustment free blade
1. In a closed position, unscrew the screw on the blade using a screwdriver or a coin.
2. Slide the anvil out towards the tip of the anvil in an opened position. 3. Put a slotted screwdriver or something else that has a tip thinner than 4mm in between the anvil and the body, and slide it out to the direction of an arrow. ( You can also take the anvil out at the point of the triangle. )
4. Slide the new anvil in all the way to the end.
5. Put the new blade in the metal spine.
6. Grip the handles and close the an
.
제조사(Maker)
옥조 | Gyokucho(Made in Japan) |
상세사진 | Pictures










제품정보 | Model
(옥조 외날형 전정가위)
(Razorsaw Single Blade Pruning Shears)
규격(Specification)
| Art.No. | 색 | 손잡이재료 | 길이 | 날두께 | ||
|---|---|---|---|---|---|---|
| TS178 TS179 TS180 | Walnut Brown | Aluminium die-casting Elastomer resin Polyamide Iron | 40mm | 1.4mm | ||
| Uguisu Green | ||||||
| Indigo Blue | ||||||
| TS181 | - | Polyamide | ||||
설명(Details)
- 미키 카지야무라 라쿠난데스 앤빌 프루너의 특성
4가지 색상으로 제공됩니다. 왼쪽부터: 월넛 브라운, 카키, 인디고 블루, 로즈 레드.
1. 교체 가능한 날을 가진 앤빌형 가지치기 가위.
2. 절삭면에 힘이 집중된다.
3. 개방 각도를 위한 2단계 조정
4. 스프링 강도를 위한 3단계 조정
5. 안전 잠금 장치를 잡고 엽니다.
6. 가벼운 무게.
7. 칼날 끝의 충격 경화
8. 스트랩을 끼우기 위한 작은 구멍.
9. 네 가지 색상으로 제공됩니다.
1. 조절 가능한 앤빌 프루너.
앤빌 가지치기 가위는 일반적인 가지치기 가위에 비해 손목에 큰 부담을 주지 않습니다다. 건염이 생기는 것을 막아줍니다.
일반적인 가지치기와 달리, 두 개의 칼날은 재료를 자를 때 서로 미끄러지지 않습니다.
칼날을 교체하려면 나사를 하나만 빼면 됩니다. 앤빌을 밀어내는 방식으로 교체할 수도 있습니다. 블레이드의 위치를 조정할 필요가 없습니다.
칼날과 모루는 부엌칼과 도마처럼 작동합니다. 오른손 사용자와 왼손 사용자 모두에게 적합합니다.
2. 절삭면에 힘이 집중됩니다.
JP. 특허 제5547700호
재료에 힘이 효율적으로 가해져 절단이 용이합니다.
칼날과 모루가 열려 있을 때, 두꺼운 재료가 입구의 맨 뒤에 들어갈 수 있도록 설계되었습니다. 당신은 큰 가지들을 쉽게 가지치기 할 수 있다.
그것들은 당신에게 깨끗한 칼자국을 주고, 그것들은 절단면을 손상시키지 않습니다. 그래서 그것들은 꽃꽂이에 아주 좋습니다. 접붙이기에도 사용할 수 있습니다.
3. 개방 각도를 위한 2단계 조정
그립 크기에 따라 개방 각도를 조정할 수 있습니다.
손이 작은 여성이나 어린이, 힘을 많이 주지 못하는 사람도 쉽게 사용할 수 있습니다. 보다 효율적으로 작업하기 위해 개방 각도를 두 가지 유형으로 조정할 수 있습니다.
4. 스프링 강도를 위한 3단계 조정
장력 스프링은 라쿠난데스의 가지치기 가위에 사용됩니다. 그립 내부에 스프링이 배치돼 있어 작업 중 만지거나 잃어버릴 염려가 없습니다.
스프링의 강도는 사용자에 따라 세 가지 유형으로 조정할 수 있습니다. 여성과 어린이들에게는 약한 스프링을 추천합니다. 빨리 가지치기를 하고 싶은 사람들에게는 더 길게 뻗은 더 강한 스프링을 추천합니다. 이렇게 하면 프루너가 더 빨리 열립니다.
5. 안전 잠금 장치를 잡고 엽니다.
프루너를 잡으면 잠금 장치가 열립니다. 한 손으로 자물쇠를 되돌릴 수 있습니다. 그것을 잡고, 당신의 다리나 몸에 걸치는 후크를 누르면, 자물쇠가 다시 켜집니다.
엔드 훅 잠금의 3개 잠금 위치.
첫 번째 위치는 한 손으로 자물쇠를 채우고 싶을 때입니다. 두 번째 위치는 후크를 끝까지 잠그지 않도록 합니다. 세 번째는 프루너 케이스에 넣기 위한 손잡이 안쪽의 후크입니다.
6. 가벼운 손잡이.
물건의 무게 자체가 손에 가해지는 스트레스의 원인이 될 수 있습니다. 그립에 알루미늄 다이캐스트 합금을 사용하여 가볍지만 힘든 작업에도 견딜 수 있습니다.
그립에는 엘라스토머 수지를 사용합니다. 이것은 적당한 탄력성을 허용합니다.
7. 블레이드 가장자리 끝의 임펄스 경화
특수 충격 경화라고 불리는 기술로 칼날을 처리합니다.
임펄스 경화는 블레이드 가장자리의 끝에서만 수행됩니다. 이렇게 하면 블레이드가 갈라지는 것을 방지할 수 있습니다.
8. 스트랩을 끼우기 위한 작은 구멍.
높은 곳에서 작업할 수 있는 스트랩 구멍이 있습니다. 손목에 끈을 매면 가위가 빠지는 것을 피할 수 있다. 이 구멍을 이용해서 원하는 대로 사용하세요.
9. 조정 프리 블레이드
1. 닫힘 위치에서 드라이버 또는 코인을 사용하여 블레이드의 나사를 풉니다.
2. 앤빌을 열린 위치에서 앤빌의 끝을 향해 밖으로 밀어냅니다. 3. 모루와 몸체 사이에 4mm보다 가는 끝이 있는 슬롯드라이버 등을 끼우고 화살표 방향으로 밀어냅니다. (삼각형의 점에서 앤빌을 꺼낼 수도 있습니다. )
4. 새 모루를 끝까지 밀어줍니다.
5. 새 칼날을 금속 척추에 꽂습니다.
6. 손잡이를 잡고 an을 닫습니다.
- Characteristics of Miki Kajiyamura RAKUNANDESU Anvil Pruner
Available in four colors. From left: Walnut Brown, Khaki, Indigo Blue, and Rose Red.
1. Anvil type pruning shears with a replaceable blade.
2. Force is concentrated on the cutting surface.
3. Two steps adjustment for opening angles.
4. Three steps adjustment for spring strength.
5. Grip and open safety lock.
6. Light weight.
7. Impulse hardening on the tip of the blade.
8. Small hole for putting a strap.
9. Available in four different colors.
1. Adjastable anvil pruner.
Compared to general pruning shears, anvil pruning shears don't put much stress on the wrist. It prevents developing tendonitis.
Unlike general pruners, two blades do not slide pass each other as they cut the material.
To replace a blade, you just need to take off one screw. The anvil can be also replaced by sliding it out. No need to adjust the position of the blade.
The blade and the anvil work just like a kitchen knife and a cutting board. For both right hand users and left hand users.
2. Force is concentrated on the cutting surface.
JP. Patent No. 5547700.
Force is efficiently applied on the material, making it easier to cut.
They are designed in a way that when the blade and the anvil are open, thick materials can fit in at the very back of the opening. You can easily prune big branches.
They give you clean cuts, and they do not damage the cutting surface. So they are great for flower arrangement. You can also use them for grafting.
3. Two steps adjustment for opening angles.
Opening angle can be adjusted depending on the size of your grip.
Women and children with smaller hands or those who can not apply much force can easily use them. If you are pruning just once in a couple of years, size of the branches varies. For working more efficiently, opening angle can be adjusted to two different types.
4. Three steps adjustment for spring strength.
Tension spring is used on Rakunandesu pruning shears. Spring is placed inside the grip, so you do not have to worry about touching it or losing it while you work with it.
Strength of the spring can be adjusted to three different types depending on the user. Weaker spring is recommended for women and children. Stronger spring that's more stretched is recommended for those who want to prune fast. The pruner opens faster this way.
5. Grip and open safety lock.
When you grip the pruner, the lock opens. You can put the lock back with just one hand. Just grip it, and press a hook against your leg or body, and the lock is back on.
Three lock positions of end hook lock.
The first position is if you want to put the lock on with one hand. The second position is with the hook all the way out for not locking. The third one is the hook completely inside the handle for putting it in the pruner case.
6. Light handle.
The weight of the item itself can be the cause of stress on your hand. Alminum die cast alloy is used on the grip, so it's light but can withstand hardwork.
We use elastomer resin on the grip. This allows moderate elasticity.
7. Impulse hardening on the tip of the blade edge.
We treat the blade with a technique called special impulse hardening just like we do on our hand saws.
Impulse hardening is done only on the tip of the blade edge. This prevents blade from cracking.
8. Small hole for putting a strap.
There is a strap hole for working at high place. You can avoid losing the shears by wearing a strap on your wrist. Please take advantage of this hole and use it as you like.
9. Adjustment free blade
1. In a closed position, unscrew the screw on the blade using a screwdriver or a coin.
2. Slide the anvil out towards the tip of the anvil in an opened position. 3. Put a slotted screwdriver or something else that has a tip thinner than 4mm in between the anvil and the body, and slide it out to the direction of an arrow. ( You can also take the anvil out at the point of the triangle. )
4. Slide the new anvil in all the way to the end.
5. Put the new blade in the metal spine.
6. Grip the handles and close the an
.
제조사(Maker)
옥조 | Gyokucho(Made in Japan) |
상세사진 | Pictures









